Revolutions： 10～75rpm Variable frequency control
Power of main motor： 7.5kW
Main speeding down motor:
（taper gear wheel speed reducers connected straightly with the electric machine）
Track width ： 110mm
The face of the track is plated with hard chromium.
Number of warp： Max 2880 pieces
Density of weft： 32—64 pcs /100mm
(through changing gears to change the density of weft)
Theoretical capacity： 43—86m/h
Warp diameter： Maxφ120mm
Weft diameter： Max φ90mm
Involution electrical machine： 100kg.cm
Involution width： Max 2200mm
Involution diameter： Max φ1100mm
Manner of statistics length： Count tool of machinery of three shifts
Specification of the shuttles： φ38χ230 or φ38χ270
Type of yarn plate： φ38
Sending warp device: initiatively sending warp(electric machine 8kg.cm×2)
Sending warp robber roller：∮150mm×2755mm
Warp broken control：
( when warp break It can stop voluntarily)
Weft broken control：
(Automatic control system of weft-broken and weft-end)
Lubricating style：The cam has forced circulated lubrication. (Lubricating oil deals with precipitation and filter of oil box)
（The lubricating style of shuttle is through oil cup dripping down)
Oil route protection：(It can stop automatically if the oil route has jam.)
Outline size: (L)15.2m×(W)3.7m×(H)4.4m
1）．The small-cam designing makes the inertia small to start-up,
and with high speed.
2）．The main electrical machine connects with the gear wheel speed reducers directly with high efficiency and long life. This solve the problem that the low efficiency of the turbine speed reducers with strap moving ,and put an end to the hidden trouble that swaying needle wheel speed reducer doesn’t resist shocking and can’t start-up with high frequency. This can reduce the energy consumption of the whole equipment, and decrease the maintenance cost.
3）.The track with swallow-tailed flume can prevent shuttle out.
4）． The dynamotor type weft detector is sensitive and reliable, it can’t be influenced by dust. It can stop automatically after weft end. And it can ensure the quality of products.
5）．The cam is lubricated circulated by force. This can promote the efficiency of the machine. It has warning device of oil route jam, this can avoid abnormal wearing and tearing of the parts.
6）． The cloth roller turbine speed reducer adopts flexible connection, this can prolong the life of the speed reducer.
7).The folding range is large, and its use is wide. One equipment can be used in several ways.
8）． The structure of the equipment is reliable and simple, it’s reliable to operate. The parts that are easy to be broken are few .They are convenient to do maintenance. And the revolving cost is not high.9). The electrical system is controlled by PLC.